|Minimum Order Quantity||1 Piece|
Main components:Machine is made of 2 main parts: 1. Screw feeding system.
2. Screw tightening system.These 2 systems are controlled by the machine's program.Operation:Hand-held Semi-automatic screw machine feeds screws in a turbine way and order screws on avibration guide rail, and transport screws between feeder to Screw driver nozzle throughPneumatic pressure and holding screw at nozzle by magnetic resonance, then one screw per timecomes to screwdriver nozzle, finally electric screwdriver will fix the screw into products.Features:1. Automatic screw feeding & fixing for various shapes screws. One-hand operation.2. Torque adjustable that ensure the quality of screw tightening.3. Turbine feeding, low noise, convenient maintenance. Light weight and small, mobility and savespace.4. Warning Alarm function when shorage of screws.5. High efficiency. No need to pick up screws, move and put screws. Just need to lock the screwsaimed at the screw hole.6. Sensor controls screws feeding one by one to avoid feeding repetition.7. It can tight screw very fast, around 60 screw per minute.8. The machine comes with in-build screw counter, so it can help to make mistake proof screw line.The range of counting we can set 0-9999 screws on digital display.9. In-build FRL for air pressure control.10. (OPTIONAL FEATURES) Also can be operated through Foot Pedal with addition attachment ofPneumatic Cylinder with StandParameterVoltage AC220V 50HZWorkingpressure3-15 KGF/cm2Workingefficiency50-70PCS/MIN(Depends on screw length)Noise Lower than 65dbConveyingdistance1-4mHopper capacity 2000pcs for M 2x6 screwsSize L305*W165*H240 Weight 8KGScrew length Less than 25mmSuitable screws M2.0-M6.0Automatic Yes, Auto feeding, sorting and fixing screwsRequirement Pneumatic Air for screw transportation
- Item Code: SASM01
- Delivery Time: In stock