ACL Products

Product Details:

Precision Rinse PMX is a non-flammable contact cleaner that is safe for most plastics and formulated to safely and quickly clean all types of electronic components and assemblies. Formulated to be fast-drying, this precision cleaner evaporates instantly and is excellent for removing oil, handling soils, dirt, grease, carbon, and light fluxes.

Use to remove carbon dust from circuit breakers and to clean ice cube trays and electrical motor assemblies.

 

• May be used on energized equipment.
• Safe to use on plastics.
• Enhances electrical signals.
• Removes encrusted dirt, grease and other contaminants.
• Penetrates hard-to-reach areas.
• Evaporates quickly; non-residual. Mild odor.
• Ozone safe: contains no CFCs, HCFCs, or 1,1,1 Trichloroethane.
• Great 141b replacement.
• Non-corrosive, non-flammable.

Electronics Cleaner Degreaser PF is a fast-drying, one-step precision cleaning and degreasing agent safe for most plastics. Formulated with very low surface tension, this high-pressure aerosol cleaner flushes areas clean, is non-residual, and evaporates instantly.

 

• Removes encrusted dirt, grease and other contaminants.
• Safe to use on plastics. Penetrates hard-to-reach areas.
• Evaporates quickly; non-residual. Very low odor. Flammable.
• Ozone safe: contains no CFCs, HCFCs, or 1,1,1 Trichloroethane

Additional Information:

• Item Code: ACL8604
• Delivery Time: IMMEDIATE
• Packaging Details: 1 PCS = 1 BOX

Product Details:

Easy to use, the ACL 380 handheld surface resistivity meter shows values through an LED scale that is coded with colors to signify conductive, dissipative, and insulative. There is also a colored “warning” stage to signal to the auditor that the material is at the higher end of the dissipative range and is close to being out of specification.

 

• Four color LED display segments (including warning stage).
• Half decades for greater accuracy.
• Conforms to ASTM D257.
• Includes calibration certificate.

Surface Resistivity Meter

More Economical Than Megohmmeters

The ACL 395 handheld meter features sophisticated circuitry that allows for the same advantages as megohmmeters, but at an economical price. Utilizing color-coded zones, the LED scale is easy to read and evaluate. Half decades indicate where the measurement value falls within the decade giving a closer indication to actual value. Unlike other pocket-sized meters, the ACL 395 features rubber rails which provide the best possible contact.

Additional Information:

• Delivery Time: Immediate

Product Details:

ACL’s Nitrile ESD Finger Cots take the worry away for those with latex allergy issues while offering protection against skin and oil contamination. Since nitrile is resistant to many chemicals, it will not dissolve under chemical contact.

 

• Powder-free / ISO 5 / Class 100 Cleanroom
• Suggested for Class II static sensitivity devices
• Compliant with ASTM and IEST-RP-CC 005.3 standards
• Immobilized packaged in anti-static, gas-impermeable film flushed with semiconductor grade N2
• 10⁹ ohms resistance as per ANSI-ESD SP15.1
• 3 mil thickness

Ideal for the following applications:
• EPAs and other ESD-sensitive areas
• Defense, avionics
• IC industries, Marine and consumer electronics
• Assembly areas, wire bonding, and laser diodes
• Repair stations, field repair kits

Features:

• Powder-free / ISO 5 / Class 100 Cleanroom
• Suggested for Class II static sensitivity devices (thresholds
  up to 3999v)
• Compliant with ASTM and IEST-RP-CC 005.3 standards
• Immobilized packaged in anti-static, gas-impermeable
  film flushed with semiconductor grade N2
• Resistance per ANSI/ESD SP15.1: 10e9 ohms
• RoHS compliant
• 3 mil thickness

Note:
Discontinue use if reddening or irritation occurs. Components used in the manufacture of nitrile finger cots may cause allergic reactions in some individuals. Consult your institution’s policies
regarding use of these products.

Additional Information:

• Pay Mode Terms: cheque against delivery
• Port of Dispatch: By Hand / Courier
• Delivery Time: immediate

Product Details:

Easy to Use:To measure resistivity in ohms persquare, test using the built-in rubberelectrodes. To measure resistance inohms, test using the optional external5-lb probes. Detailed instructions arefound in the ACL 395 manual.Product #395 includes tester, two cables,9-volt battery, and calibration certificate.


Specifications: Accuracy: +/- 0.25 decade in the dissipative range Power Supply: 9-volt alkaline battery Test Voltage: 10 volts at values less than 106 100 volts at values of 106 and greater Resistivity Limits: 103 - 1012 ohms per square Resistance Limits (when using external probes): 103 - 1012 ohms LED Colors: Green 103 - 106, Yellow 3 x 106 - 109,Orange 3 x 109 - 1010 Red 1011 - 1012 Weight: 8.9 ounces Size: 5 ¼” x 1 ???” x 3”

Additional Information:

• Delivery Time: 1 Day

Product Details:

Staticide Ultra IIIdeal for Any Static Control Environment.

Whether revitalizing old ESD tiles or protecting a new epoxy floor, ACLs Staticide Floor Wax Ultra II Floor Finish will help safeguard your costly investment of specialized flooring. This distinctive anti-static blend is compatible with problematic plasticizers found in conductive and dissipative tiles and epoxy. Staticide Ultra II is also the ultimate choice for adding gloss and static protection to concrete..

Ideal choice for any static control environment, such as electronic, medical, clean room manufacturing facilities and sensitive device manufacturing..

Please be aware of extended lead times during winter. Due to the limited freeze cycles on this product, ACL only ships floor finishes and paint on Mondays and Tuesdays during the winter months. In cases of extreme temperatures and weather patterns, a shipping halt may occur.

• Coverage is approximately 1500  2000 sq. ft. per gallon
• V.O.C. is less than 4%
• Solids are 21%+ 5%
• UL listed for slip resistance
• Compliant to ANSI/ESD S20.20
• Surface resistivity 107  109 ohms per square
• Strip cycle is 12 - 18 months
• Use on concrete, epoxy, ESD epoxy and dissipative tile

• Product #4800-11-gallon container; 4 per case
• Product #4800-55-gallon pail
• Product #4800-254-gallon drum

Additional Information:

• Port of Dispatch: By Hand / By Courier
• Delivery Time: immediate
• Packaging Details: 1 Gallon

Product Details:

Staticide Acrylic Floor Finish offers high-tech static protection at a reasonable price. This economical formula leaves a durable, glossy finish that can last up to twelve months, making it a popular choice for budget-minded companies with industrial areas where static control is essential. Perfect anti-static floor finish for production areas, warehousing, shipping, laboratories and electronic repair facilities.

 

• Coverage is approximately 1500  2000 sq. ft. per gallon.
• V.O.C. is less than 4%. Solids are 20% 5%. UL listed for slip resistance.
• Compliant to ANSI/ESD S20.20. Surface resistance (RTT): 10⁸  10⁹ ohms @ 100v at 12 RH.
• Strip cycle is 6  12 months. Strip cycle is 6  12 months.

Staticide Ultra

Ideal Choice for Clean Room Facilities

No other ESD floor finish can match Staticide Ultra Floor Finish for electrical properties, physical longevity, and gloss. This urethane-enhanced formula features superior abrasion resistance and durability, fortifying floors with a long-lasting protective layer that is shiny and ESD-safe for 12 to 24 months.

 

• Coverage is approximately 1500  2000 sq. ft. per gallon.
• V.O.C. is less than 4%. Solids are 20% 5%. UL listed for slip resistance.
• Compliant to ANSI/ESD S20.20. Surface resistance (RTT): 10⁷  10⁹ ohms @ 100v at 12 RH.
• Strip cycle is 12  24 months. Use on vinyl, linoleum, or ceramic tile

Staticide Ultra II

Ideal for Any Static Control Environment

Whether revitalizing old ESD tiles or protecting a new epoxy floor, ACLs Staticide Ultra II Floor Finish will help safeguard your costly investment of specialized flooring. This distinctive anti-static blend is compatible with problematic plasticizers found in conductive and dissipative tiles and epoxy. Staticide Ultra II is also the ultimate choice for adding gloss and static protection to concrete.

 

• Coverage is approximately 1500  2000 sq. ft. per gallon
• V.O.C. is less than 4%. Solids are 21% 5%. UL listed for slip resistance.
• Compliant to ANSI/ESD S20.20.
• && Surface resistance (RTT): 10⁷  10⁹ ohms @ 100v at 12 RH. Strip cycle is 12  18 months.
• Use on concrete, epoxy, ESD epoxy and dissipative tile.

Additional Information:

• Port of Dispatch: By Hand / By Courier
• Delivery Time: immediate
• Packaging Details: 1 Gallon

Product Details:

Heavy Duty Staticide^®Eliminate Static on Carpets, Upholstery, & Fabrics

Heavy Duty Staticide^® is a static control product that is ideal for eliminating static and preventing tribogeneration on carpets, upholstery, and fabrics. It is also appropriate to use in avoiding jamming or material slippage during printing, packaging, and converting. This solution can even be used as an aid to avert dangerous static-triggering situations such as the ignition of combustible vapors, dust, or solvents.

Additional Information:

• Packaging Details: 1-quart bottle; 12 per case (trigger sprayer)

Product Details:

Foaming, Non-Streaking, Static-Neutralizing Cleaner

ACL Anti-Static Plastic and Glass Cleaner effectively cleans, polishes, and neutralizes charges during use. A single application removes electrostatic buildup while also removing dirt, grease, ink, fingerprints and nicotine stains. Plastic and Glass Cleaner will not streak, smear, scratch, or abrade. Transparent surfaces are left spotless for improved optical clarity and distortion-free reading.

This foam cleaner is ideal to use on computer monitors and housings. It keeps observation windows on production equipment in pristine condition longer than other cleaners and does not contain CFC's or HCFC's.

• Controls static while cleaning and polishing
• Effectively removes handling oils, finger soils, and nicotine stains
• Prevents attraction of dust and dirt
• Compatible with plastics, glass, and stainless steel
• Foaming spray won't run or drip; ideal for optical surfaces
• RoHS compliant

Additional Information:

• Port of Dispatch: By Hand / By Courier
• Delivery Time: immediate

Product Details:

Flux Remover Lead-Free is an extra-strength solvent that removes heavy and encrusted flux deposits resulting from high temperature lead-free soldering applications. This powerful cleaner quickly removes all types of flux, oxide particles, carbon, dust, grease, oil, and then evaporates quickly,leaving no residues.

 

• Quickly removes all rosin and no-clean flux types
• Removes encrusted, hard, baked-on fluxes and residues
• Removes oil, grease, ionic, and non-ionic residues
• Cleans and removes R, RA, RMA, and all synthetic flux residues. Non-abrasive, non-corrosive.
• Evaporates quickly and leaves no residue
• Ozone safe: contains no CFC’s or HCFC’s
• Flammable. Low odor.

ACL Flux Remover No Clean

Extra strength for removing no clean flux

Flux Remover No Clean is an extra-strength solvent that removes heavy and encrusted flux deposits resulting from no clean soldering applications. This powerful cleaner penetrates quickly into hard to reach areas and will evaporate quickly leaving no residues. Use the brush applicator for the removal of heavy soils.

 

• Quickly removes all rosin and no-clean flux types.
• Removes encrusted, hard, baked-on fluxes and residues.
• Non-corrosive; safe to use on metal.
• Evaporates quickly and leaves no residue.
• Ozone safe: contains no CFC’s or HCFC’s.
• Flammable. Low odor.

ACL A4 All Purpose Flux Remover and Cleaner

Environmentally Friendly Replacement

A4 All Purpose Flux Remover and Cleaner is an extra strength solvent that has a powerful spray and strong solvent that blasts off residues and cleans areas under components that brushing cannot reach. It is specifically designed to replace chemical formulas using HCFC-141b and AK225. Designed to remove no clean and rosin fluxes without using ozone depleting chemicals.

 

• Replaces HCFC 141b and AK225
• Quickly removes all rosin and no clean flux types
• Removes encrusted, hard, baked-on fluxes and residues
• Removes oil, grease, ionic, and non-ionic residues
• Cleans and removes R, RA, RMA, and all synthetic flux residues. Non-abrasive, non-corrosive. Non-flammable.
• Evaporates quickly and leaves no residue.
• Ozone safe: contains no CFC’s or HCFC’s.

Additional Information:

• Delivery Time: immediate

Product Details:

Turbo Blast Precision Duster is an economical, high-precision duster with a bigger blast for electronic cleaning applications. Its exceptional purity blast instantly cleans surfaces free of particulate contamination. Turbo Blast Precision Duster is engineered to remove dirt, dust, oxide particles, and other airborne particles instantly, and can be used to facilitate the accelerated drying of solvent cleaners in a variety of applications.

 

• Cleans hard-to-reach areas. Non-flammable.
• May be used on energized equipment.
• Non-corrosive and non-abrasive; will not scratch surfaces.
• Ultra-pure; filtered to 0.20 microns.
• Non-residual. Ozone safe: contains no CFC’s or HCFC’s.

Additional Information:

• Item Code: ACL8640
• Delivery Time: IMMEDIATE
• Packaging Details: 1 PCS = 1 BOX

Product Details:

This peak-performance cleaner penetrates deeply to displace moisture and inhibit corrosion on electronic and electrical components. Not only is this dynamic universal cleaner suitable for loosening frozen moving parts such as hinges, joints, and solenoids, it provides lasting protection against metal oxidation. Lubricant Contact Renew is engineered to clean, lubricate, and protect connectors in one easy step. This non-flammable cleaner/lubricant will clean contact surfaces and provide a long-lasting protective film that guards the contact from corrosion.

 

• Flammable. High solids for superior lubrication.
• Foaming spray penetrates to remove moisture.
• Loosens, cleans, and protects frozen and corroded parts.


• Designed to minimize friction and metal wear in metal-to-metal contacts.
• May be used on energized equipment. Safe to use on plastics.
• Penetrates deep to clean hard-to-reach places.
• Protects metal contacts from carbon build-up and signal loss.
• Cleans, lubricates, protects, and prevents metal friction in hard-to-reach areas. Mild odor.
• Ozone safe: contains no CFCs, HCFCs, or 1,1,1 Trichloroethane
• Non-corrosive, non-flammable.

Additional Information:

• Item Code: ACL
• Delivery Time: immediate
• Packaging Details: 1 Bottle

Product Details:

Staticide Static Sentry is ideal for eliminating charge generation on both porous and non-porous materials. Inhibiting tribogeneration has a multitude of benefits including minimizing system errors and downtime for machinery, preventing dust attraction on plastic, and removing static attraction on garments. Packaged in a special can, the Staticide Static Sentry can operate at different angles to allow for horizontal spraying. It can be used on a variety of surfaces including laminate flooring, carpeting, fabrics, cabinetry, work surfaces, paper, polycarbonate, acrylic, PET, and glass. It is safe to use in manufacturing facilities for static control on carrying trays, keyboards, protective packaging, test equipment, smocks and ESD protective clothing

Additional Information:

• Item Code: ACL2006
• Delivery Time: IMMEDIATE
• Packaging Details: 1 BOX = 1 PCS

Product Details:

Silicone Conformal Coating is ideal for providing insulation against high-voltage arcing and corrosion. This highly effective insulative barrier is the ideal choice for protection against rust and corrosion in high humidity situations. Although not intended for outdoor use, Silicone Conformal Coating provides protection against the intermittent exposure of rain and salt on printed circuit board and electronic assemblies.

 

This tough, transparent coating will not fragment, chip, or crack, and provides exceptional acid resistance. Its maximum dielectric strength is 1100 volts/mil. This ready-to-use formula does not require mixing.

 

• Operating temperature from -55°F/-64°C to 390°F/199°C.
• High dielectric breakdown of 1100 volts/mil.
• Designed to provide effective insulation against electrical shorts and harsh environments.
• No ozone-depleting substances.
• Provides excellent acid resistance.
• Self-healing; easily repairable. RoHS compliant.
• Contains UV tracer for easy quality control.

Additional Information:

• Port of Dispatch: By Hand / By Courier
• Delivery Time: immediate

Product Details:

Flux Remover Lead-Free is an extra-strength solvent that removes heavy and encrusted flux deposits resulting from high temperature lead-free soldering applications. This powerful cleaner quickly removes all types of flux, oxide particles, carbon, dust, grease, oil, and then evaporates quickly,leaving no residues.

The Flux Remever Lead-Free is suitable to use on printed circuit boards, motors, generators, metal housings, plugs,sockets, relays, contacts, switches, heat sinks, chip carriers, surface mount devices and pads.

• Quickly removes all rosin and no-clean flux types
• Removes encrusted, hard, baked-on fluxes and residues
• Removes oil, grease, ionic, and non-ionic residues
• Cleans and removes R, RA, RMA, and all synthetic flux residues
• Non-abrasive, non-corrosive
• Evaporates quickly and leaves no residue
• Ozone safe: contains no CFC's or HCFC's
• Flammable
• Low odor

Additional Information:

• Item Code: ACL-8622
• Delivery Time: IMMEDIATE
• Packaging Details: 1 PCS = 1 BOX

Product Details:

3030 Staticide® 30 ConcentrateNon-Flammable and No Chlorides.
Staticide®30 Concentrate provides the same long-lasting staticprotection as #3000 Staticide® Original Concentrate but in anon-flammable formula with superior wetting properties.The Staticide®30 Concentrate is ideal to use in the manufacture ofshielding bags because it contains no contaminants like chloridesor silicone..

Additional Information:

• Production Capacity: 10
• Delivery Time: Immediate
• Packaging Details: Product #3030Q 1-quart bottle

Product Details:

Staticide^® ESD Safety ShieldAdvanced Dissipative Static ControlThe Staticide® ESD safety shield coatings are made of a proprietary blend of conducting polymers which allows the coating to be inherently dissipative regardless of ambient relative humidity. Unlike surfactants, this Pedot formulation provides dependable protection by allowing static to dissipate safely without wearing off or losing resistivity.
Intended for indoor use, the Staticide® ESD Safety Shield is simple to use since it is a water-based one-part system. Whether applied by spraying, flow coat, dipping, or foam brush, the coating will be translucent without appearing "milky".

Additional Information:

• Port of Dispatch: By Hand / By Courier
• Delivery Time: immediate

Product Details:

Anti-Static Aerosol Formula

The 6500 formula, like the 6300, is designed for applications on common plastics such as acrylic, PET, PETG, PVC, and polycarbonate, but it is available in an economical aerosol container. A light spray application is sufficient for excellent electrical performance. Coating cures at ambient temperature. Intended for indoor use, this product is ideal for plastic parts, bins, and shelving.

• Product #65008 oz can

Product Datasheet (PDF)

Additional Information:

• Port of Dispatch: By Hand / By Courier
• Delivery Time: immediate

Product Details:

ACLs Restorer Cleaner is a specialized anti-static cleaner that will stretch the maintenance cycle of ACL Staticide dissipative floor finishes by restoring gloss and revitalizing the protective properties of the coating.

Neutral cleaners that are safe for most floor polishes can often harm ESD-safe finishes by introducing contaminants and abrasive ingredients. 4100 Restorer Cleaner will lift dirt and reestablish shine in problem areas that are prone to wear by heavy traffic. In addition, this unique concentrated formula contains special conductive additives that simultaneously break down electrical discharge, lower resistivity, and return floors to safe specifications.

Whether used as a spot-cleaner or as a detergent for full floor maintenance, including Restorer Cleaner as part of the Staticide dissipative floor finish maintenance plan can save companies money by successfully prolonging cleaning and strip cycles. Available as a concentrate, this cost-effective solution is suitable for mops, auto-scrubbers, and standard burnishing machines.

Additional Information:

• Item Code: ACL4100
• Delivery Time: IMMEDIATE
• Packaging Details: 1 BOX = 1 PCS

Product Details:

Features:

Cleans, rejuvenates, and extends the life of ESD mats Contains no alkali or ammonia Contains no chemical on RoHS and REACH SvHC No GHS classification Meets or exceeds Mil 81705 & NFPA 56A with an electrostatic decay time of .1 second according to Federal Test Method 4046.

Easy to Use:Apply liberally to the areas to be cleaned.Wait 2-3 minutes to allow emulsifiers to penetrate. Wipe dry with a lint-free cloth such as ACL LF50 Heavy Duty Lint Free Wipes or ACL 8099 Lint Free Wipe.Product #6001 Quart size includes trigger spray Product #6002 gallon Product #6002-55-gallon pail Product #6002-2 .

Additional Information:

• Item Code: ACL6001
• Production Capacity: Covers approximately 1000 - 1500 square feet per diluted gallon
• Delivery Time: IMMEDIATE
• Packaging Details: 4 Gallon = 1 BOX

Product Details:

Anti-static topicals are easy-to-use solutions that reduce static electricity. Staticide anti-stats decay static to a zero charge faster than any other anti-static topical on the market. Unlike other anti-static topicals, Staticide Concentrate is formulated to be effective independent of relative humidity.

2002 / 2005  Heavy Duty Staticide

Heavy Duty Staticide is a static control product that is ideal for eliminating static and preventing tribogeneration on carpets, upholstery, and fabrics. It is also appropriate to use in avoiding jamming or material slippage during printing, packaging, and converting. This solution can even be used as an aid to avert dangerous static-triggering situations such as the ignition of combustible vapors, dust or solvents.

• Staticide topicals can be applied by spraying, wiping, dipping, transfer roller coating, gravure coating or flexographic printing.
• Low odor.
• Every Staticide topical dilution is proven to be effective in relative humidity below 15%.
• Exceeds MIL-B-81705 specifications for static decay in accordance with Federal Test Standard 101, method 4046.
• One gallon covers approximately 2000 sq.ft. and will last from weeks to months, depending on the application and the material its applied to.

General Purpose Staticide

Using General Purpose Staticide can prevent damage of sensitive electronic equipment, components, and sub-assemblies during manufacture, shipping or receiving by reducing a static charge to zero volts. This solution inhibits charge generation on all surfaces its applied to including tote boxes and carriers used to process and store electronic components. Using General Purpose Staticide can also reduce dust, dirt, and bacteria attraction by removing the charge. Non-toxic and safe to use, this solution can be used in industrial, institutional, and commercial environments.

• Every Staticide topical dilution is proven to be effective in relative humidity below 15%.
• Exceeds MIL-B-81705 specifications for static decay in accordance with Federal Test Standard 101, method 4046
• One gallon covers approximately 2000 sq.ft. and will last from weeks to months, depending on the application and the material its applied to.
• Staticide topicals can be applied by spraying, wiping, dipping, transfer roller coating, gravure coating or flexographic printing.

Additional Information:

• Item Code: ACL2003
• Delivery Time: IMMEDIATE
• Packaging Details: 1 BOX = 1 PCS

Product Details:

The ACL 750 Combo-Tester measures electrical resistance of wrist straps and heel grounders simultaneously and individually. It can also do what pass/fail testers cannot: Give actual resistance readings and store data.

 

When the software is used, test results are stored on a computer which allows you to monitor and analyze test information and help manage your company’s static control program and remain compliant to ESDA S20.20.

 

• Simultaneous testing for wrist and feet.
• Adjustable limits from 500k and 750k for low setting and 2M to 100M ohms high setting.
• Optional circuit relay for security doors.
• Optional card readers available.
• Multiple units can be networked via company LAN for data compiling.
• Compatible with latest Windows based software.
• Auto-generate reports and email them to supervisors.
• Includes calibration certificate traceable to NIST.

Product Details:

Staticide®30 Concentrate provides the same long-lasting static protection associated with the Staticide® name, but in a non-flammable formula with superior wetting properties. The Staticide® 30 Concentrate is ideal for the manufacture of shielding bags because it contains no contaminants like chlorides or silicone. The formula does not include substances on the REACH SvHC list or in the RoHS Directive 2002/95/EC. Staticide® 20 provides the same anti-static protection as the Staticide®Original Concentrate, but has no fragrance or perservatives. It has a mild alcohol odor and slightly fewer chlorides than the original. Staticide®, the original anti-static concentrate, is the key ingredient in many ACL anti-static solutions. Once diluted with water or isopropyl alcohol, it eliminates a host of static control problems – especially in the electronics, textiles and plastics industries. Staticide® Concentrate saves freight, handling and storage costs for high production facilities while offering greater flexibility in dilution.
Staticide® Original Concentrate can be mixed in the following concentrate to solvent ratios to obtain these Staticide® formulations.

Other Details:

• Heavy Duty Staticide® – 1 to 39 (1 part concentrate to 39 parts solvent)
• General Purpose Staticide® – 1 to 99 (1 part concentrate to 99 parts solvent)
• Exceeds MIL-B-81705 specifications for static decay in accordance with Federal Test Standard 101, method 4046
• Surface resistance 109 to 1010 ohms
• Flammable, No floral mask
• For porous materials dilute 1 to 39 (1 part concentrate to 39 parts solvent)
• For non-porous materials dilute 1 to 99 (1 part concentrate to 99 parts solvent)
• Exceeds MIL-B-81705 specifications for static decay in accordance with Federal Test Standard 101, method 4046
• Decays static to zero volts in less than 2 seconds.
• Surface resistance 109 to 1010 ohms
• Non-flammable, No contaminants such as chlorides or silicone
• Exceeds MIL-B-81705 specifications for static decay in accordance with Federal Test Standard 101, method 4046
• Proven effective in relative humidity below 15%
• Surface resistance between 108 – 1010 ohms, Dilute with water or isopropyl alcohol

Additional Information:

• Delivery Time: Immediate

Product Details:

Features:

• Static dissipative
•  Improves wrist strap performance 
• Non-corrosive 
• No glycerin, silicone, lanolin or mineral oil 
• Appearance: Blue 
• Fragrance: Mild fresh scent or fragrance-free

Easy to Use: 

Spread product evenly on the front and back of hands, wrists, and in between fingers. Massage into skin until lotion is completely absorbed.

Available in Fresh Scent 

Product# 7001S 1 oz squeeze bottle Product# 7001 8 oz squeeze bottle Product# 7016 16 oz bottle with pump Product #7002 Gallon with pump

Additional Information:

• Delivery Time: 4 to 5 Weaks

Product Details:

These roomy single-layer polyethylene anti-static trash can liners are humidity independent and amine-free. The average resistance of the liners is 10¹⁰ ohms. Static decay rate is less than two seconds per Mil-B-81705D Type II-Federal test method 101C method 4046.

 

• Medium size 1.5 mil liner fits in 11-gallon containers like our 5075 Wastebasket. It comes in two colors (pink and black).
• Extra large 2 mil liners fit in 40-45 gallon containers and available in pink.

 

Roomy polyethylene anti-static trash can liners are available in
pink and black. The average surface resistivity of the liners is
1010 ohms per square. Static decay rate is less than two seconds
per Mil-B-81705B Type II-Federal test method 101C
method 4046.

Features:

• Linear high-density polyethylene.
• 13” diameter rim x 21.75” high.
• 11-gallon container.
• Will not tribogenerate.
• Will not outgas.
• Accepts conductive bags and anti-static bags.
• No carbon or dyes.
• No silicone or plasticizers.

Additional Information:

• Delivery Time: Immediate

Product Details:

The ACL 807 Concentric Point Probe is a precision instrument for measuring surface resistivity in compliance to ANSI/ESD STM11.11. The small size is ideal for measurements in hard-to-reach areas where 5-lb concentric ring probe doesn’t fit. The portability and comfortable ergonomic design allows the user to audit specimens in the field and laboratory without sacrificing accuracy.

 

This device uses spring loaded electrodes with conductive rubber boots to ensure superior contact with hard and irregular surfaces. The pogo-pin type ATE-quality probes are made of beryllium copper with minimum 60 micro-inch hard gold.

 

ACL’s Dual Point Pen Probe is a precision instrument for measuring resistance between two points. Its small size is ideal for measurements in hard-to-reach areas where 5-lb probes don’t fit. The portability and comfortable ergonomic design allows the user to audit specimens in the field and laboratory without sacrificing accuracy.

 

This device uses spring loaded electrodes with conductive rubber boots to ensure superior contact with hard and irregular surfaces. The pogo-pin type ATE-quality probes are made of beryllium copper with minimum 60 micro-inch hard gold.

 

• Conforms to ANSI/ESD STM11.11-2006 and ANSI/ESD STM11.12-2006.
• Sprig loaded electrodes with conductive rubber boots.
• Measuring areas 0.35″ (8.89mm).
• Made in the USA.